![background image](http://html2.mh-extra.com/html/icom/ic-f62d/ic-f62d_operating-manual_4278581088.webp)
8
MDC 1200 SYSTEM OPERATION
8-7
Transmitting a call
D
Transmitting an MDC Message call
You can send a MDC Message call� There are 16
kinds of Messages�
(Menu > Signaling/Call >
Message
)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan
►
Signaling/Call
►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select
“Message,” then push [OK]�
INDIV Select
►
Message
►
Signaling/Call
4� Push [P2 (Up)] or [P1 (Down)] to select a
Message, push [PTT] transmit an MDC Message
call�
✔
MSG 1
✔
MSG 2
Message
•
“Success” is displayed when an acknowledgment is
received from the targeted station�
•
“Failed” is displayed if an acknowledgment is not
received from the targeted station�
TIP:
•
Push [Message] to directly display the “Message”
screen in step 4 above�
•
Hold down [Message] for 1 second to transmit
the preset Message that is set in the “Message”
screen�