7
NXDN™ OPERATION
7-4
D
Transmitting a Group call
You can call a specific group.
(Menu > Signaling/Call >
Call List Select
)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan
►
Signaling/Call
►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “Call List
Select,” then push [OK]�
Call List Select
►
Call Menu
►
Signaling/Call
4� Push [P2 (Up)] or [P1 (Down)] to select the Group
ID�
✔
Station 1
✔
Group 1
Call List Select
5� Push [PTT] to transmit a Group call�
6� Hold down [PTT] to speak�
7� Release [PTT] to receive�
TIP:
•You can also select a Group in the “Group Select”
screen�
(Menu > Signaling/Call >
Group Select
)
•You can also transmit a Group call through the Call
Menu�
(Menu > Signaling/Call >
Call menu
)
• When a Group ID is set in the Memory CH, you
can transmit the Group call by pushing [PTT] on
the channel�
•Push [Call List Select] to directly display the “Call
List Select” screen in step 4 to the left�
Transmitting a call
