7
NXDN™ OPERATION
7-6
D
Transmitting a Message
You can transmit a message of up to 100 characters�
(Menu > Signaling/Call >
Call Menu
)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan
►
Signaling/Call
►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “Call
Menu,” then push [OK]�
Call List Select
►
Call Menu
►
Signaling/Call
4� Push [P2 (Up)] or [P1 (Down)] to select the
Individual or Group ID, then push [OK]�
✔
Station 1
►
✔
Group 1
►
Call Menu
5� Push [Up] or [Down] to select “Message,” then
push [OK]�
✔
Status
►
✔
Message
►
Station 1
6� Push [Up] or [Down] to select a Message, then
push [PTT] to transmit it�
✔
Go to Area 1
►
✔
Return to Office
►
Message
• “Success” is displayed when an acknowledgment is
received from the targeted station�
• “Failed” is displayed if an acknowledgment is not
received from the targeted station�
L
After selecting a Message, push [OK] to display
the “Message Display” screen to see the whole
message� The Message can be up to 100 characters�
Go to Area 2 after you
finish your task. I have
made about half of
Message Display
TIP:
•You can also transmit a Status message through
Message
�
(Menu > Signaling/Call >
Message
)
•Push [Message] to directly display the “Message”
screen in step 6 to the left�
•Hold down [Message] for 1 second to transmit the
preset Status message that is set in the “Message”
screen�
Transmitting a call
