7
NXDN™ OPERATION
7-14
The Multi-site Trunking mode enables the transceiver
to move to another site, according to the preset Site
list*, in order to find a site that has a higher quality
signal, or provides better services�
The Roaming function is automatically activated when
the transceiver goes out of the range, and does not
receive the downlink signal from the repeater in the
currently registered site�
In this case, the transceiver displays “Searching�”
Searching
Call
Scan
Depending on the presettings, the transceiver tries to
register to the repeater that has the strongest RSSI
level in the last registered site or an adjacent site�
This roaming type takes more time than other roaming
types�
The transceiver displays “Out of Range” when the
transceiver cannot register to any site after searching�
Out of Range
Call
Scan
* The valid roaming areas (up to 48) are listed on the
Site list�
D
Roaming Request function
The Roaming Request function enables the
transceiver to start or resume a Roaming scan,
regardless of the error rate�
Push [Roaming Request] to start or resume the
Roaming scan�
L
Even if the Site Lock function is ON, and the transceiver
is locked to the currently registered site, pushing
[Roaming Request] resumes a Roaming scan�
Roaming function (For Multi-site Trunking operation)
