Icom IC-905 Advanced Manual Download

Page: 94 / 215

GPS OPERATION (ADVANCED)

9-17

Transmitting NMEA data

Set a GPS sentence to transmit GPS data in the DV

mode�

Setting the GPS data sentence

1�

Open the NMEA SET screen.

GPS > GPS TX Mode >

NMEA

2�

Touch “GPS Sentence.”

3�

Select the GPS sentence.

•

Displays “

✓

” when the sentence is set to ON.

The selectable GPS sentences are RMC, GGA, GLL,

VTG, GSA, and GSV. The GGA sentence is set to

ON as the default GPS sentence.

To reset to the default setting, push

, and then

touch “Default.”

4�

Repeat step 3 to set the GPS sentence.

Up to 4 GPS sentences can be set at a time.

5�

To close the “GPS Sentence” screen, push

several times.

•

Returns to the standby screen, then

displayed.

NOTE:

•

Set “GSV Sentence” to “OFF” when sending the GPS

message to conventional digital transceivers. (p. 9-2)

•

If “Position Input” is set to “Manual,” the transceiver

automatically sets the NMEA sentence, and transmits

it along with the manually entered position data in

“Manual Position.”

» GPS > GPS Set >

Position Input

» GPS > GPS Set >

Manual Position

•

Note that if “GPS Auto TX” is set to any other option

than “OFF,” data is automatically transmitted according

to the set time�

» GPS >

GPS Auto TX

If “Position Input” is set to “Manual,” the GPS

Automatic Transmission function is not activated.

Contents of GPS sentence

Sentence

Lon

/Lat

Alt

UTC

Date

(UTC) Status

/3D

COG

(True)

SOG

(knot)

Others

RMC

✔

Magnetic variation, Mode Indicator

GGA

✔

Number of satellites in use, HDOP,

Geoidal separation, Age of Differential

GPS data, Differential reference station ID

GLL

✔

Mode Indicator

VTG

✔

COG (Magnetic north), SOG (km/h),

Mode Indicator

GSA

✔

PRN number of satellites used in

solution, PDOP, HDOP, VDOP

GSV

Total number of sentences, Sentence

number, Total number of satellites in

view, Satellite information (ID, Elevation,

Azimuth, S/N)

Summary of Contents for IC-905
























































































































































































































Search results

Summary of Contents for IC-905

Reviews:

Related manuals for IC-905

Brands by name

Popular brands

Icom IC-905, Advanced Manual

Search results

Summary of Contents for IC-905

Reviews:

Related manuals for IC-905

Brands by name

Popular brands