Icom IC-905 Advanced Manual Download Page 79

Page: 79 / 215

GPS OPERATION (ADVANCED)

9-2

GPS TX mode and TX format types

GPS position data has 2 TX modes, D-PRS and

NMEA. Moreover, the D-PRS mode data, 5 position

formats, Position (Mobile station/Base station), Object,

Item, and Weather, are selectable.

Example:

When the caller’s TX format is D-PRS

Position (Mobile)

» GPS >

GPS Position

D-PRS

D-PRS is a function that simultaneously sends position data received from the internal

GPS receiver, using the slow speed data packet space, along with voice.

Position (Mobile)

A station operating from a vehicle, or other position, away from its normal base position.

Position (Base)

A station operating at home or in a building.

Object

Transmitting Object data such as earthquake information, satellite tracking information,

and so on�

An Object contains a time stamp.

Item

Transmitting Item data such as a traffic accident, lighthouse, antenna, or DV access point

position, and so on�

An Item does not contain a time stamp.

Weather

A station transmitting weather information received from a weather device.

NMEA

A station transmitting position data (NMEA0183) received from the internal GPS receiver.

Differences between older models

(As of March 2023)

•

The GPS TX mode, “GPS (DV-G)” and “GPS-A (DV-A),” are now called “NMEA (DV-G)” and “D-PRS (DVA).”

GPS (DV-G) → NMEA (DV-G)

GPS-A (DV-A) → D-PRS (DV-A)

•

For users who have one of the following models:

ID-800H, IC-91AD/E91, IC-U82, IC-V82, IC-7100, ID-51A/E, ID-31A/E, IC-9100, IC-80AD/E80D, ID-880H/E880,

IC-92AD/E92D, IC-2820H/E2820

When you receive a D-PRS position (Base), Object, Item, or Weather information, their data is not displayed.

•

Only the ID-52A/E, ID-51A/E PLUS, ID-51A/E PLUS2, ID-31A/E PLUS, ID-5100A/E, ID-4100A/E, IC-R30,

IC-9700, IC-705, and IC-905 can receive Power, Height, Gain, and Directivity data.

•

For users who have one of the following models:

IC-9100, IC-80AD, IC-E80D, ID-880H, ID-E880, IC-92AD, ICE92D, IC-U82, IC-V82

If you transmit with the Altitude setting ON, the character string is included in a comment on the transceivers that

cannot display altitude.

•

Set GSV sentence to OFF when sending a GPS message to conventional digital transceivers (IC-2820H,

IC-E2820, ID-800H, IC- 91AD, IC-E91, IC-V82, IC-U82, IC-2200H). The GSV sentence is incompatible with them.

They will not display GPS messages properly if sent as a GSV sentence from the IC-905.

Summary of Contents for IC-905
























































































































































































































Search results

Summary of Contents for IC-905

Reviews:

Brands by name

Popular brands

Icom IC-905, Advanced Manual

Search results

Summary of Contents for IC-905

Reviews:

Brands by name

Popular brands