Icom IC-905 Advanced Manual Download Page 97

Page: 97 / 215

GPS OPERATION (ADVANCED)

9-20

GPS Memory

Adding a GPS Memory

5. Entering the GPS Memory latitude

1�

Touch “LATITUDE.”

2�

Touch a digit to enter.

3�

Enter the latitude.

Set to between 0°00.00′ to 90°00.00′.

You can change the unit.

SET > Display > Display Unit >

Latitude/Longitude

4�

Repeat steps 2 and 3 to enter the latitude.

5�

Touch [N/S] to set to a north latitude (N) or a south

latitude (S).

6�

After entering, touch [ENT].

6. Entering the GPS Memory longitude

1�

Touch “LONGITUDE.”

2�

Touch a digit to enter.

3�

Enter the longitude.

Set to between 0°00.00′ to 180°00.00′.

You can change the unit.

SET > Display > Display Unit >

Latitude/Longitude

4�

Repeat steps 2 and 3 to enter the longitude.

5�

Touch [E/W] to set to an east longitude (E) or a

west longitude (W).

6�

After entering, touch [ENT].

7. Entering the GPS Memory altitude

1�

Touch “ALTITUDE.”

2�

Touch [+/–] to set to plus or minus.

3�

Enter the altitude.

Set to between –32808 and +32808 feet.

4�

After entering, touch [ENT].

8. Selecting a GPS Memory group

1�

Touch “GROUP.”

2�

Touch the group between (No Group) and A ~ Z.

You can save up to 300 Memories in each group.

Summary of Contents for IC-905
























































































































































































































Search results

Summary of Contents for IC-905

Reviews:

Related manuals for IC-905

Brands by name

Popular brands

Icom IC-905, Advanced Manual

Search results

Summary of Contents for IC-905

Reviews:

Related manuals for IC-905

Brands by name

Popular brands