![background image](http://html1.mh-extra.com/html/icom/ic-905/ic-905_advanced-manual_4161563104.webp)
9
GPS OPERATION (ADVANCED)
9-27
GPS SET
NOTE:
The default settings shown below are for the USA transceiver version. The default settings may differ,
depending on your transceiver version. To return to your transceiver version’s default settings, push
and
touch “Default.”
» GPS >
GPS Set
Position Input
(Default: Internal GPS)
Selects how to capture position data.
•
Internal GPS: Position data of the internal GPS
receiver is used for the GPS
functions.
•
Manual:
Manually enter the current Latitude,
Longitude, and Altitude in “Manual
Position.”
» GPS > GPS Set >
GPS Option
SBAS
(Default: OFF)
Turns the SBAS (Satellite Based Augmentation
System) function ON or OFF.
L
When turning ON this function, the GPS position
accuracy can be improved, but the transceiver’s power
consumption increases.
•
OFF: Turns OFF the function.
•
ON: Turns ON the function.
GLONASS
(Default: OFF)
Selects whether or not to use the data from
the GLONASS (GLObal’naya NAvigatsionnaya
Sputnikovaya Sistema) satellites.
L
When turning ON this function, the GPS position
accuracy can be improved, but the transceiver’s power
consumption increases.
•
OFF: Does not use the data from the GLONASS
satellites.
•
ON: Uses the data from the GLONASS satellites.
Satellite Information Out
(Default: GPS/QZSS/GLONASS)
Selects whether or not to output the data from the
QZSS (Quasi-Zenith Satellite System) satellites and
the GLONASS satellites.
•
GPS/QZSS/GLONASS:
Outputs the data from the GPS
satellites, the QZSS satellites, and the
GLONASS satellites.
•
GPS Only: Outputs the data from only the GPS
satellites.
» GPS >
GPS Set
Manual Position
(Default: LATITUDE: 0°00.00′N,
LONGITUDE: 0°00.00′W,
ALTITUDE: ------ft)
Manually enter the latitude, longitude, and Altitude of
your current position.
L
You can capture position data from the GPS receiver if
“Capture From GPS” is selected.
»
GPS
GPS TX Mode
(Default: OFF)
Selects a GPS transmission mode to send GPS
position data while in the DV mode.
•
OFF: Does not transmit GPS data.
•
D-PRS: Transmits GPS data in the D-PRS format.
•
NMEA: Transmits GPS data in the NMEA format.
»
GPS > GPS TX Mode >
D-PRS
Unproto Address
(Default: API905,DSTAR*)
Displays an unproto address of up to 56 alphanumeric
characters.
NOTE:
You should use the default address, and
editing is not recommended.
TX Format
(Default: Position)
Selects the format to transmit the position data in the
D-PRS mode.
•
Position: The caller station is the mobile or base
station�
•
Object: Transmits a certain location’s information,
such as an event, earthquake, and so on.
(The time stamp data is included.)
•
Item:
Transmits repeater or antenna information
that needs no time information�
(The time stamp data is not included.)
•
Weather: Transmits weather information received
from a weather device.