![background image](http://html1.mh-extra.com/html/icom/ic-905/ic-905_advanced-manual_4161563180.webp)
12
ABOUT THE DV GATEWAY FUNCTION
12-11
Setting up the device
Connecting to a router
Connect the transceiver to the router using the LAN
cable�
Gateway Repeater (Server IP/Domain)
Enter the gateway repeater’s address or domain name�
L
The address consists of up to 64 characters�
NOTE:
You must have your call sign registered to a
gateway server that has the RS-RP3C installed� Ask
the gateway repeater administrator for details�
Terminal/AP Call sign
Enter the Terminal/AP call sign that is registered
as the access point on the RS-RP3C’s Personal
Information screen�
L
The call sign should be 8 characters long�
• Enter spaces before the 8th character if necessary�
•
Enter a desired ID suffix between A to Z, except for G,
I, and S, for the 8th character�
Gateway Type
(Default: Global)
Selects the gateway type�
L
Select “Global” when operating outside of Japan�
UDP Hole Punch
(Default: OFF)
Selects whether or not to use the UDP Hole Punch
function� This function enables you to communicate
with other station who uses the Terminal or Access
Point mode even if you do not forward port 40000 of a
router� (p� 12-6)
L
Information
• You cannot communicate using this function when
the destination station uses the software that is not
compatible with the UDP Hole Punch function�
• When forwarding port 40000 of a router, select “OFF�”
D
When using the Internal Gateway function
Setting the Internal Gateway Settings
1� Open the INTERNAL GATEWAY SETTINGS
screen�
»
2
> DV GW >
Internal Gateway Settings
2� Touch to select the item to set�
(Example: “Terminal/AP Call sign”)
3� Enter a call sign, and then touch [ENT]�
L
See right for details on the setting items and their
options�
4� To close the INTERNAL GATEWAY SETTINGS
screen, push
several times�
To the [LAN] port
LAN cable
Router
IC-905