Icom IC-905 Advanced Manual Download

Page: 114 / 215

GPS OPERATION (ADVANCED)

9-37

GPS SET

GPS

GPS Position (continued)

<5. When the caller’s TX format is D-PRS Weather>

Compass*

Displays the caller’s direction from

your location.

Latitude

Displays the caller’s latitude.

Longitude

Displays the caller’s longitude.

Displays the grid locator based on

the latitude and longitude of the

caller’s location.

DST

Displays the caller’s distance from

your location.

TEMP

Displays the temperature of the

caller station’s area.

RAIN

Displays the rainfall of the caller

station’s area.

WIND DIR

Displays the wind direction of the

caller station’s area.

WIND SPD

Displays the wind speed of the

caller station’s area.

BARO

Displays the barometric pressure of

the caller station’s area.

HUMI

Displays the humidity of the caller

station’s area.

Symbol

Displays the caller’s D-PRS

symbol.

SSID

Displays the caller’s SSID.

GPS Time Stamp

Displays the time that the caller

acquired the position data.

Call sign

Displays the caller’s call sign (with

SSID).

MEM screen

(GPS memory position)

Compass*

Displays GPS Memory channel’s

direction from your location.

Latitude

Displays GPS Memory channel’s

latitude.

Longitude

Displays GPS Memory channel’s

longitude.

Displays the grid locator based on

the latitude and longitude of the

GPS Memory channel.

DST

Displays GPS Memory channel’s

distance from your location.

GPS memory name

Displays the caller’s call sign (with

SSID).

You can change the GPS Memory in the QUICK MENU

screen.

ALM screen

(GPS alarm position)

Compass*

Displays GPS Alarm area’s

direction from your location.

Latitude

Displays GPS Alarm area’s latitude.

Longitude

Displays GPS Alarm area’s

longitude.

Displays the grid locator based on

the latitude and longitude of the

GPS Alarm area.

DST

Displays GPS Alarm area’s

distance from your location.

GPS Alarm

Displays “RX,” GPS memory

group name, or GPS memory

name specified for the GPS Alarm

function.

You can change the GPS Alarm in the QUICK MENU

screen.

* You can change the display type in the QUICK MENU

screen.

Summary of Contents for IC-905
























































































































































































































Search results

Summary of Contents for IC-905

Reviews:

Related manuals for IC-905

Brands by name

Popular brands

Icom IC-905, Advanced Manual

Search results

Summary of Contents for IC-905

Reviews:

Related manuals for IC-905

Brands by name

Popular brands