Icom IC-905 Advanced Manual Download Page 3

Page: 3 / 215

INTRODUCTION

FUNCTIONS AND FEATURES OF ADOBE

ACROBAT

READER

The following functions and features can be used with Adobe Acrobat Reader.

•

Keyword search

Click “Find” (Ctrl+F) or “Advanced

Search” (Shift+Ctrl+F) in the Edit

menu to open the search screen.

This is convenient when searching

for a particular word or phrase in this

manual.

The menu screen may differ,

depending on the Adobe Acrobat

Reader version.

Click to open the find or

search screen or advanced

search screen.

• Find screen

• Advanced search screen

•

Printing out the desired pages.

Click “Print” in File menu, and then select the paper

size and page numbers you want to print.

The printing setup may differ, depending on the printer.

Refer to your printer’s instruction manual for details.

Select the “A4” size to print out the page in the original

manual size.

•

Read Out Loud feature.

The Read Out Loud feature reads aloud the text in

this PDF.

Refer to the Adobe Acrobat Reader Help for the

details.

( This feature may not be usable, depending on your

PC environment, including the operating system.)

The screen may differ, depending on the Adobe Acrobat Reader version.

Summary of Contents for IC-905
























































































































































































































Search results

Summary of Contents for IC-905

Reviews:

Related manuals for IC-905

Brands by name

Popular brands

Icom IC-905, Advanced Manual

Search results

Summary of Contents for IC-905

Reviews:

Related manuals for IC-905

Brands by name

Popular brands