Icom IC-905 Advanced Manual Download

Page: 86 / 215

GPS OPERATION (ADVANCED)

9-9

Transmitting D-PRS data

When D-PRS is selected as the GPS TX mode, you

can transmit D-PRS data. When operating in the

D-PRS mode, the following codes are transmitted to

the PC. D-PRS code is based on APRS

code.

(APRS

: Automatic Packet Reporting System)

D-PRS

D-STAR Packet Reporting System (D-PRS) is a mode

that simultaneously sends position data received from

the internal GPS receiver, using the slow speed data

packet space, along with voice audio in the DV mode.

In the Analog mode, you can transmit or receive only

voice audio or data at one time. However, a D-PRS

capable radio can transmit or receive message data

or GPS position data at the same time voice is being

transmitted or received. An I-GATE is required to send

position data to the APRS server.

NOTE:

•

If “Position Input” is set to “Manual,” the manually

entered position data in “Manual Position” is changed to

the D-PRS data format to transmit.

» GPS > GPS Set >

Position Input

•

Note that if “GPS Auto TX” is set to any other setting

than “OFF,” the data is transmitted according to the set

time�

» GPS >

GPS Auto TX

Operating in the D-PRS mode

To transmit D-PRS data, follow the steps below. For

more details, see the pages listed along with the

steps�

1�

Enter “MY” (Your own call sign). (p. 10-4)

2�

Confirm the GPS signal receiving.

3�

Set GPS TX mode to “D-PRS.” (p. 9-27)

4� Set TX information�

You must set “SSID” and “Symbol.”

GPS > GPS TX Mode >

D-PRS



Complete!

You can transmit in the D-PRS mode.

D-STAR Repeater

Voice, Messages, and

D-PRS positions

<Using a Repeater>

<Simplex>

Voice, Messages, and

D-PRS positions

Voice, Messages, and

D-PRS positions

Voice, Messages, and

D-PRS positions

I-GATE

APRS server

INTERNET

JA3YUA-Z

You can check the
position on a map site!

D-PRS positions

D-PRS

positions

Information from

an APRS network

The image of D-PRS

TIP:

In the D-PRS mode, you can transmit

earthquake or weather information, in addition to

position data�

GPS > GPS TX Mode > D-PRS >

TX Format

TX format of D-PRS

•

Position (Mobile/Base):

Used to transmit position data.

•

Object: Used to transmit specifi c position data.

(Contains a time stamp.)

•

Item:

Used to transmit specifi c position data.

(Does not contain a time stamp.)

•

Weather: Used to transmit weather information.

Summary of Contents for IC-905
























































































































































































































Search results

Summary of Contents for IC-905

Reviews:

Related manuals for IC-905

Brands by name

Popular brands

Icom IC-905, Advanced Manual

Search results

Summary of Contents for IC-905

Reviews:

Related manuals for IC-905

Brands by name

Popular brands