![background image](http://html1.mh-extra.com/html/icom/ic-905/ic-905_advanced-manual_4161563064.webp)
7
SCANS
7-8
Select Memory scan
Repeatedly scans Select Memory channels (
★
1,
★
2,
★
3)�
“
★
1,” “
★
2,” and “
★
3” show that the channel
is specified as a Select Memory�
Ch 00
★
1
Ch 01
★
2
Ch 02
★
1
Ch 03
★
1
Ch 04
★
1
Ch 05
★
1
Ch 06
★
2
Ch 50
★
3
Ch 98
★
1
Ch 99
★
1
L
If two or more Memory channels are not designated as
Select Memory channels, the Select Memory scan does
not start�
D
Setting the Select Memory channels
1� Select the Memory mode�
2� Display the SCAN screen�
»
SCAN
3� Rotate
to select memory channels to set
as Select Memory channels�
4� Touch [SELECT] to set the selected number�
L
Each touch selects “
★
1,” “
★
2,” “
★
3,” or “(no icon)�”
D
Select Memory scan operation
1� Select the Memory mode�
2� Display the SCAN screen�
»
SCAN
3� Touch [MEMO] for 1 second�
4� Touch the Select Memory channel number�
(Example:
★
1)
• The Select Memory scan starts�
L
Information
• When a signal is detected, the scan pauses
according to the “SCAN Resume” setting, and then
resumes�
• To return to the regular Memory scan, touch
[SELECT]�
• While scanning, touch [SEL No�] to select the Select
Memory scan number�
• To cancel the scan, touch [MEMO]�
5� To close the SCAN screen, push
�
Clearing all Select Memory channels
1� Touch [SELECT] for 1 second on the SCAN
screen�
• The SELECT ALL CLEAR screen is displayed�
2� Touch the Select Memory channel number to
clear�
Blinks
5� Repeat steps 3 and 4 to set more than two Select
Memory channels�
TIP: Setting Select Memory channels on the
MEMORY screen.
1� Display the MEMORY screen�
» MEMORY >
Group 00 ~ 99
2� Touch the SELECT icon to set the channel as a
Select Memory channel� (Example:
★
1)
L
Each touch selects “
★
1,” “
★
2,” “
★
3,” or “(no icon)�”
Selected
number