manualshive.com logo in svg

Icom IC-905, Advanced Manual

Share
Download
Icom IC-905 Advanced Manual Download Page 33

3

SD CARD (ADVANCED)

3-2

Loading the saved data files

You can load the Memory channels and transceiver’s 

settings from the SD card to the transceiver.

 

L

The transceiver has “ALL” and “Select” loading options to 

choose from.

TIP:

 Saving the current data is recommended before 

loading other data into the transceiver.

(Basic manual)

1� 

Open the LOAD SETTING screen.

 

 »

SET > SD Card > 

Load Setting

2� 

Touch the file to load.

 

3� 

Touch “Select.”

 

 

L

If you want to load all the contents on the LOAD OPTION 

screen, touch “ALL” and go to step 6.

 

L

If you want to load only the repeater list, touch “Repeater List 

Only” and go to step 6.

4� 

Touch the loading options. 

 

(Example: CI-V Address)

 

 •

“

✓

” is displayed on the left side of the selected option.

 

L

The Set mode settings and Memory channel contents 

are always loaded.

5� 

Touch “<<Load>>.”

 

6� 

Touch [YES] or [NO].

 

 

L

When you touch [YES], the skip settings of the 

repeater list are retained.

 

L

When you touch [NO], the skip settings of the 

repeater list are cleared.

7� 

Touch [YES].

 

 

L

After the loading ends, “COMPLETED! Restart the 

IC-905.” is displayed.

 

L

When you select “REF Adjust” in step 4, “The new 

“REF Adjust” setting will be saved” is displayed.

8� 

Turn OFF the transceiver, then turn it ON again to 

restart the transceiver.

Summary of Contents for IC-905
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands