Icom IC-905 Advanced Manual Download Page 163

Page: 163 / 215

D-STAR OPERATION (ADVANCED)

11-31

Entering new information into the repeater list

Rearranging the display order of the

repeaters

You can move the entered repeaters to rearrange their

display order in the selected repeater group

1 Open the REPEATER GROUP screen

> DV/DD MEMORY >

Repeater List

2 Touch a repeater group where the repeater you

want to move is listed (Example: 12: Japan)

3 Touch a repeater that you want to move for 1

second (Example: Hirano)

4 Touch “Move”

5 Touch a repeater to insert the repeater you want

to move above it

Blinks

• The selected repeater is inserted above the

destination repeater name

If you touch “<<Move End>>,” the repeater is moved

to the bottom of the group

6 To close the Repeater List screen, push

several times

Adding new repeater information from

RX History

1 Open the RX HISTORY screen

2 Rotate

to display the repeater you want

to add to the repeater list

3 Touch [DETAIL]

4 Rotate

to display “RXRPT1” and

“RXRPT2”

5 Push

6 Touch “Add To Repeater List”

7 Touch the repeater call sign that you want to add

to the repeater list

• Displays the REPEATER LIST EDIT screen The

selected repeater call sign is automatically entered

See pages 11-26 ~ 1 1-28 to edit the contents

8 Touch “<<Add Write>>”

•

The confirmation dialog is displayed.

9 Touch [YES]

• The repeater contents are added to the repeater list,

and the display returns to the RX HISTORY screen

Summary of Contents for IC-905
























































































































































































































Search results

Summary of Contents for IC-905

Reviews:

Brands by name

Popular brands

Icom IC-905, Advanced Manual

Search results

Summary of Contents for IC-905

Reviews:

Brands by name

Popular brands