manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 368

6 25

What to do in an emergency

Notes on the safe use of the
TireMobilityKit

• Park your car at the side of the

road so that you can work with the
TireMobilityKit away from moving
traffic. Place your warning triangle
in a prominent place to make pass-
ing vehicles aware of your location.

• To be sure your vehicle won't

move, even when you're on fairly
level ground, always set your park-
ing brake.

• Only use the TireMobilityKit for

sealing/inflation passenger car
tires. Do not use on motorcycles,
bicycles or any other type of tires.

• Do not remove any foreign objects-

such as nails or screws -that have
penetrated the tire.

• Before using the TireMobilityKit,

read the precautionary advice
printed on the sealant bottle!

• Provided the car is outdoors, leave

the engine running. Otherwise
operating the compressor may
eventually drain the car battery.

• Never leave the TireMobilityKit

unattended while it is being used.

• Do not leave the compressor run-

ning for more than 10 min. at a time
or it may overheat.

• Do not use the TireMobilityKit if the

ambient temperature is below -30°C
(-22°F).

• Do not use the sealing compound

after its expiration date which can
be found on the label of the bottle.

• Keep away from children.

Technical Data

System voltage: DC 12 V
Working voltage: DC 10 - 15 V
Amperage rating: max. 15 A
Suitable for use at temperatures:

-30 ~ +70°C (-22 ~ +158°F)

Max. working pressure:

6 bar (87 psi)

Size 
Compressor: 168 x 150 x 68 mm 

(6.6 x 5.9 x 2.7 in.)

Sealant bottle: 104 x ø 85 mm

(4.1 x ø 3.3 in.)

Compressor weight:

1.05 kg (2.31 lbs)

Sealant volume:

300 ml (18.3 cu. in.)

✽

✽

NOTICE

Sealing compound and spare  parts can
be obtained and  replaced at an author-
ized vehicle or tire dealer. Empty sealing
compound bottles may be disposed of at
home. Liquid residue from the sealing
compound should be disposed of by your
vehicle or tire dealer or in accordance
with local waste disposal regulations.

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands