manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 118

Features of your vehicle

40

4

Recalling positions from memory

1. Change the ignition switch to the ON

position.

2. To recall the position in the memory,

press the desired memory button (1 or
2). The system will beep once, then the
driver’s seat will automatically adjust to
the stored position.

Adjusting the control switch for the dri-
ver’s seat while the system is recalling
the stored position will cause the move-
ment to stop and move in the direction
that the control switch is moved.

Easy access function 
(if equipped)

The system will move the driver's seat
automatically as follows:
• Without smart key system

- It will move the driver’s seat rearward

when the ignition key is removed.

- It will move the driver’s seat forward

when the ignition key is inserted.

• With smart key system

- It will move the driver’s seat rearward

when the engine start/stop button is
changed to the OFF position.

- It will move the driver’s seat forward

when the engine start/stop button is
changed to the ACC or START posi-
tion.

You can activate or deactivate this feature.
Refer to "User setting" in this section.

WARNING 

Use caution when recalling the
adjustment memory while sitting in
the vehicle. Push the seat position
control switch to the desired posi-
tion immediately if the seat moves
too far in any direction.

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands