Hyundai i40 Saloon 2012 Owner'S Manual Download Page 277

Page: 277 / 464

Driving your vehicle

The engine will also restart automati-
cally without the driver’s any actions
if the following occurs:

- The fan speed of manual climate con-

trol system is set above the 3rd position
when the air conditioning is on.

- The fan speed of automatic climate

control system is set above the 6th
position when the air conditioning is on.

- When a certain amount of time has

passed with the climate control system
on.

- When the defroster is on.
- The brake vaccum pressure is low.
- The battery charging status is low.
- The vehicle speed exceeds 5 km/h (3

mph).

The green AUTO STOP (

) indicator

on the instrument cluster will blink for 5
seconds and a message “Auto Start” will
appear on the LCD display.

Condition of ISG system opera-
tion

The ISG system will operate under
the following condition:

- The driver’s seat belt is fastened.
- The driver’s door and engine hood are

closed.

- The brake vaccum pressure is ade-

quate.

- The battery is sufficiently charged.
- The outside temperature is between

-2°C to 35°C (28.4°F to 95°F).

- The engine coolant temperature is not

too low.

OVF051034

■

Type A

■

Type B

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Search results

Summary of Contents for i40 Saloon 2012

Reviews:

Brands by name

Popular brands

Hyundai i40 Saloon 2012, Owner'S Manual

Search results

Summary of Contents for i40 Saloon 2012

Reviews:

Brands by name

Popular brands