manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 22

3 7

Safety system of your vehicle

Seatback angle

1. Push the control switch forward or

backward to move the seatback to the
desired angle.

2. Release the switch once the seat

reaches the desired position.

Seat cushion height (if equipped)

1. Pull the front portion of the control

switch up to raise or down to lower the
front part of the seat cushion. Pull the
rear portion of the control switch up to
raise or down to lower the rear part of
the seat cushion.

2. Release the switch once the seat

reaches the desired position.

Lumbar support (if equipped)

The lumbar support can be adjusted by
pressing the lumbar support switch on
the side of the seat.
1. Press the front portion of the switch to

increase support, or the rear portion of
the switch, to decrease support.

2. Release the switch once it reaches the

desired position.

OVF031006

OVF031007

OVF031008

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands