manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 155

4 77

Features of your vehicle

Engine coolant tempera-
ture warning light
(if equipped)

The warning light illuminates if the tem-
perature of the engine coolant is above
120±3°C (248±5.4°F).
Do not continue driving with an overheat-
ed engine. If your vehicle overheats, refer
to “Overheating” in section 6.

✽

✽

NOTICE

If the engine coolant temperature warn-
ing light illuminates, it indicates over-
heating that may damage the engine.

Glow indicator 
(Diesel engine)

The indicator light illuminates when the
ignition switch is placed at the ON posi-
tion. The engine can be started after the
preheat indicator light goes off. The illu-
minating time varies with the water tem-
perature, air temperature and battery
condition.

✽

✽

NOTICE

If the engine does not start within 10
seconds after the preheating is complet-
ed, turn the ignition key once more to
the LOCK/OFF position for 10 seconds,
and then to the ON position, in order to
preheat again.

CAUTION

If the preheat indicator light contin-
ues to illuminate or flash on and off
after the engine has warmed up or
while driving, have the system
checked by an authorized HYUNDAI
dealer as soon as possible.

CAUTION - 

Diesel engine

If the Emission Control System
Malfunction Indicator Light blinks,
some error related to the injection
quantity adjustment  occurs which
could result in loss of engine
power, combustion noise and poor
emission. Have the Engine Control
System inspected as soon as pos-
sible by an authorized HYUNDAI
dealer.

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands