manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 204

Features of your vehicle

126

4

Adjusting the driver and passenger side
temperature equally

1. Press the DUAL button again to deac-

tivate DUAL mode. The passenger
side temperature will be set to the
same temperature as the driver side.

2. Operate the driver side temperature

control button. The driver and passen-
ger side temperature will be adjusted
equally.

Temperature conversion 

You can switch the temperature mode
between Centigrade to Fahrenheit as
follows:
While pressing the OFF button, press the
AUTO button for 3 seconds or more.
The display will change from Centigrade
to Fahrenheit, or from Fahrenheit to
Centigrade.

✽

✽

NOTICE

• If the battery has been discharged or

disconnected, the temperature mode
display will reset to Centigrade.

• Vehicle's equipped with AVN system

refer to the navigation manual pro-
vided separately. 

OVF041158

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands