manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 114

Features of your vehicle

36

4

✽

✽

NOTICE

The sunroof cannot tilt when it is in the
slide position but can slide while in a tilt
position. 

Sunshade

• To open the sunshade, pull the sunroof

control lever backward to the first
detent position.

• To close the sunshade when the sun-

roof glass is closed, push the sunroof
control lever forward.

To stop the sliding at any point, pull or push
the sunroof control lever momentarily.

Sliding the sunroof 

When the sunshade is closed

If you pull the sunroof control lever back-
ward to the second detent position, the
sunshade will slide all the way open then
the sunroof glass will slide all the way
open. To stop the sunroof movement at
any point, pull or push the sunroof control
lever momentarily.

When the sunshade is opened

If you pull the sunroof control lever back-
ward, the sunroof glass will slide all the
way open. To stop the sunroof movement
at any point, pull or push the sunroof con-
trol lever momentarily.

WARNING 

• Never adjust the sunroof or sun-

shade while driving. This could
result in loss of control and an
accident that may cause death,
serious injury, or property dam-
age.

• If you would like to carry items on

the roof using a cross bar, do not
operate the sunroof.

• When carrying cargo on the roof,

do not load heavy items above
the sunroof or glass roof.

• Do not allow children to operate

the sunroof.

OYF049214

OVF041028

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands