manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 107

4 29

Features of your vehicle

WARNING - 

Windows

• NEVER leave the ignition key in

the vehicle.

• NEVER leave any child unattend-

ed in the vehicle.

Even very

young children may inadvertently
cause the vehicle to move, entan-
gle themselves in the windows,
or otherwise injure themselves or
others.

• Always double check to make

sure all arms, hands, head and
other obstructions are safely out
of the way before closing a win-
dow.

• Do not allow children to play with

the power windows. Keep the dri-
ver’s door power window lock
switch in the LOCK position
(pressed). Serious injury can
result from unintentional window
operation by the child.

• Do not extend face or arms out-

side the window while driving.

Power window lock button

For Europe

• The driver can disable the power win-

dow switches on rear passenger doors
by pressing the power window lock but-
ton located on the driver’s door to the
LOCK position (pressed).

Except Europe

• The driver can disable the power win-

dow switches on the passenger doors
by pressing the power window lock but-
ton located on the driver’s door to the
LOCK position (pressed).

• When the power window lock switch

is in the LOCK position (pressed),
the driver’s master control cannot
operate the front and/or rear pas-
senger door power windows.

OVF041022

CAUTION

• To prevent possible damage to

the power window system, do not
open or close two windows or
more at the same time. This will
also ensure the longevity of the
fuse.

• Never try to operate the main

switch on the driver's door and
the individual door window
switch in opposing directions at
the same time. If this is done, the
window will stop and cannot be
opened or closed.

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands