manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 135

4 57

Features of your vehicle

Door

•

Auto Door Lock

Off - The auto door lock operation will be

canceled.

Speed - All doors will be automatically

locked when the vehicle speed
exceeds 15km/h (9.3mph).

Shift Lever - All doors will be automati-

cally locked if the shift lever
is shifted from the P(Park)
position to the R(Reverse),
N(Neutral) or D(Drive) posi-
tion. (for automatic transaxle
shift lever)

•

Auto Door Unlock

Off - The auto door unlock operation will

be canceled.

Key Out - All doors will be automatically

unlocked when the ignition key
is removed from ignition switch.

Shift Lever - All doors will be automati-

cally unlocked if the shift
lever is shifted to the
P(Park) position. (for auto-
matic transaxle shift lever)

Lamp 

•

Headlamp Escort

On - The Headlamp Escort and Headlamp

Welcome function will be activated.

Off - The Headlamp Escort and Headlamp

Welcome function will be inactivated.

For details, refer to “Lighting” in section 4.

OVF041061

■

Type A

■

Type B

OVF041062

■

Type A

■

Type B

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands