manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 171

4 93

Features of your vehicle

✽

✽

NOTICE

• In the below conditions the system

will be cancelled. Park your vehicle
manually.
1. Search for parking space
- When the ABS/ESP is activated
- When the vehicle speed is over

40km/h (24.8mph)

- When you press the Smart Parking

Assist System button (the front and
rear Parking Assist System operates)

- When you shift the shift lever to R

(Reverse)

2. Steering wheel control

- When the ABS/ESP is activated
- When the vehicle speed is over

7km/h (4.3 mph)

- When you press the Smart Parking

Assist System button (the front and
rear Parking Assist System operates)

- When you shift the shift lever to D

(Drive) before entering the parking
space

- When you hold the steering wheel

firmly

System malfunction

• If there is a problem with the system,

when the system is turned on, the
above message will appear. Also, the
indicator on the button will not light up
and a beep sound will be heard 3
times.

• If there is a problem with only the

Smart Parking Assist System, the
Parking Assist System will operate
after 2 seconds.
If you notice any problem, have your
vehicle checked by an authorized
HYUNDAI dealer as soon as possible.

OVF041115

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands