manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 310

5 49

Driving your vehicle

Cruise control switch

CANCEL: Cancels cruise control opera-

tion.

/ CRUISE : Turns cruise control sys-

tem on or off.

RES+: Resumes or increases cruise

control speed.

SET-: Sets or decreases cruise control

speed.

To set cruise control speed:

1. Press the cruise 

/CRUISE button

on the steering wheel, to turn the sys-
tem on. The cruise indicator light  will
illuminate.

2. Accelerate to the desired speed, which

must be more than 40 km/h (25 mph).

✽

✽

NOTICE - 

Manual transaxle

For manual transaxle vehicles, you
should depress the brake pedal at least
once to set the cruise control after start-
ing the engine.

3. Move the lever down (to SET-), and

release it at the desired speed. The
cruise set indicator light will illuminate.
Release the accelerator pedal at the
same time. The desired speed will
automatically be maintained.

On a steep grade, the vehicle may  slow
down or speed up slightly while going
downhill.

OVF051012

OVF051070

■

Type B

■

Type A

OVF051013

OVF051020

■

Type B

■

Type A

OVF051015

OVF051022

■

Type B

■

Type A

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands