manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 206

Features of your vehicle

128

4

Fan speed control

The fan speed control knob allows you
to control the fan speed of the airflow in
the vehicle.
To change the fan speed:
• Turn the knob to the right (+) to

increase fan speed.

• Turn the knob to the left (-) to decrease

fan speed.

To turn off the fan speed, press the OFF
button.

Air conditioning

Press the A/C button to turn the air con-
ditioning system on (indicator light will
illuminate).
Press the button again to turn the air
conditioning system off.

WARNING

• Continue using the climate control

system in the recirculated air posi-
tion may allow humidity to
increase inside the vehicle which
may fog the glass and obscure vis-
ibility.

• Do not sleep in a vehicle with the

air conditioning or heating system
on. It may cause serious harm or
death due to a drop in the oxygen
level and/or body temperature.

• Continue using the climate control

system in the recirculated air posi-
tion can cause drowsiness or
sleepiness, and loss of vehicle
control. Set the air intake control to
the outside (fresh) air position as
much as possible while driving.

OVF041160

■

Type B

OVF041161

■

Type A

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands