manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 243

4 165

Features of your vehicle

13.

Button (CD Changer :

AC600DFE/AC610DFC))

Push 

button to load CDs to avail-

able CDC deck (from 1~6). Push 
button for more than 2 seconds to load
into all available decks. The last CD will
play. 10 seconds idle status will disable
loading process.

NOTE:

Order of playing files (folders) :
1. Song playing order :

to 

sequen-

tially.

2. Folder playing order :

❋

If no song file is contained in the
folder, that folder is not displayed.

LOAD

LOAD

LOAD

VF_AC600DFE_CDC

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands