manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 315

Driving your vehicle

54

5

2. Move the lever down (to SET-).
3. Move the lever up (to RES+) or down

(to SET-), and release it at the desired
speed. Move the lever up (to RES+) or
down (to SET-) and hold it. The speed
will increase or decrease by 5 km/h (3
mph).

The set speed limit will be displayed.

To drive over the preset speed limit you
must depress hard on the accelerator
pedal (more than approximately 80%)
until the kick down mechanism works
with a clicking noise. Then the set speed
limit will blink and chime will sound until
you return the vehicle speed within the
speed limit.

✽

✽

NOTICE

• Depressing the accelerator pedal less

than approximately 50%, the vehicle
will not speed over the preset speed
limit but maintain the vehicle speed
within the speed limit.

• A clicking noise heard from the kick

down mechanism by depressing the
accelerator pedal fully is a normal
condition.

OVF051018

OVF051025

■

Type A

■

Type B

OVF051026

■

Type A

■

Type B

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands