Hyundai i40 Saloon 2012 Owner'S Manual Download Page 320

Page: 320 / 464

5 59

Driving your vehicle

• If the driver takes one’s hands off the

steering wheel while the LKAS is acti-
vated, the system will warn the driver
after several seconds with a visual and
audible warning.

• If the driver still does not have one’s

hand on the steering wheel after sev-
eral seconds, the system will be auto-
matically cancelled.

✽

NOTICE

• Even though the steering is assisted by

the system, the driver may control the
steering.

• The steering wheel may feel heavier

when the steering wheel is assisted by
the system than when it is not.

WARNING

The warning message may appear
late according to road conditions.
Therefore, always have your hands
on the steering wheel while driving.

WARNING

• The driver is responsible for

accurate steering.

• Turn off the system and drive the

vehicle personally in below situa-
tions.
- In bad weather
- In bad road condition
- When the steering wheel needs

to be controlled by the driver
frequently.

OVF051061

OVF051066

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Search results

Summary of Contents for i40 Saloon 2012

Reviews:

Brands by name

Popular brands

Hyundai i40 Saloon 2012, Owner'S Manual

Search results

Summary of Contents for i40 Saloon 2012

Reviews:

Brands by name

Popular brands