manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 312

5 51

Driving your vehicle

To cancel cruise control, do one
of the following:

• Depress the brake pedal.
• Depress the clutch pedal if equpped

with a manual transaxle.

• Shift into N (Neutral) if equpped with

an automatic transaxle.

• Press the CANCEL switch located on

the steering wheel.

• Decrease the vehicle speed lower than

the memory speed by 20 km/h (12
mph).

• Decrease the vehicle speed to less

than approximately 40 km/h (25 mph).

Each of these actions will cancel cruise
control operation (the cruise set indicator
light  will go off), but it will not turn the
system off. If you wish to resume cruise
control operation, move up the lever (to
RES+) located on your steering wheel.
You will return to your previously preset
speed.

To resume cruising speed at
more than approximately 40 km/h
(25 mph):

If any method other than the cruise 
/CRUISE button was used to cancel
cruising speed and the system is still
activated, the most recent set speed will
automatically resume when you move
the lever up (to RES+).
It will not resume, however, if the vehicle
speed has dropped below approximately
40 km/h (25 mph).

OVF051016

OVF051023

■

Type B

■

Type A

OVF051014

OVF051021

■

Type B

■

Type A

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands