manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 172

Features of your vehicle

94

4

REARVIEW CAMERA (IF EQUIPPED)

The rearview camera will activate when
the back-up light is ON with the ignition
switch ON and the shift lever in the R
(Reverse) position.

Type B

The rearview camera may be turned off
by pressing the ON/OFF button when the
rearview camera is activated.
To turn the camera on again, press the
ON/OFF button again when the ignition
switch is on and the shift lever in R
(Reverse). Also, the camera will turn on
automatically whenever the ignition
switch is turned off and on again.

✽

✽

NOTICE

The warning "Warning ! Check sur-
roundings for safety " will appear on the
rearview display when the rearview
camera is activated. 

OVF041101

OVF041106

■

Type B

OVF041102

■

Type A

Rear view display 

Rear view display 

WARNING

• This system is a supplementary

function only. It is the responsibili-
ty of the driver to always check the
inside/outside rearview mirror and
the area behind the vehicle before
and while backing up because
there is a dead zone that  cannot
be seen through the camera.

• Always keep the camera lens

clean. If the lens is covered with
foreign matter, the camera may
not operate normally.

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands