manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 239

4 161

Features of your vehicle

• AF(AF MENU indication is possible with 
RDS MENU)
Select this item to turn the AF(Alternate
Frequency) feature ON or OFF.

• TA VOL.(TA VOL. MENU indication is 
possible with RDS MENU)
Adjusts the TA (Traffic Announcement) vol-
ume level according to normal audio vol-
ume level.

• REGION(REGION MENU indication is 
possible with RDS MENU)
Selects whether REGION code is used
(ON) or not (OFF) once the radio deter-
mines the AF jump condition. If AUTO is
selected, AF jump condition is determined
automatically via PI reception status.

• CLOCK
Select this item to enter Clock setup
mode.(12/24Hr., Auto, Time)

• 12/24 Hr.
Select “12/24 Hr.” button to enter Time
Format menu.

• Auto
Select “Auto” button to enter Automatic
RDS Time menu.

• Time
Select “Time” button to enter Time setting.
Adjust the hour and press the 
knob to set. Adjust the minute and press
the 

knob to  complete and exit

from clock adjustment mode. Pressing the

button more than 0.8 seconds

while in power off, screen will allow the
user to make immediately adjustments to
the clock.

• PHONE (if equipped)
Select this item to enter PHONE setup
mode. Refer to “BLUETOOTH PHONE
OPERATION” section for detailed infor-
mation.

❈

“PHONE” menu is not available if the

audio does not support Bluetooth features.

SETUP

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands