manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 167

4 89

Features of your vehicle

✽

✽

NOTICE

• Turn on the hazard warning flasher if

it is crowded with other vehicles.

• If the parking lot is small, slowly drive

more nearer to the parking space.

• The search for a parking space will be

completed only when there is enough
space for the vehicle to move to park. 

✽

✽

NOTICE

• When searching for a parking space,

the system may not be able to find a
parking space if there is no vehicle
parked, a parking space is available
after driving by or a parking space is
available before driving by.

• The system may not operate normally

in the following conditions:
(1) When the sensors are frozen
(2) When the sensors are dirty
(3) When it snows or rains heavily
(4) When a pillar or object is near

✽

✽

NOTICE

Slowly drive forward maintaining the
distance of approximately 50cm ~
150cm (19.6in.~59.0in.) with the parked
vehicles. If not within the distance, the
system may not be able to search for a
parking space.

OVF041117

CAUTION

After searching for a parking space
is completed, continue using the
system after checking the sur-
rounding area.

CAUTION

While using the Smart Parking
Assist System if the Auto Hold acti-
vates the above message will
appear. Turn the Auto Hold opera-
tion off. When you cancel the Auto
Hold operation by depressing the
accelerator pedal, always check the
surrounding area near your vehicle. 

OLM041273

50~150 cm

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands