manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 287

Driving your vehicle

26

5

With the shift lever in the D position 

The paddle shifter will operate when the
vehicle speed is more than 10km/h.
Pull the [+] or [-] paddle shifter once to
shift up or down one gear and the system
changes from automatic mode to manual
mode.
When the vehicle speed is lower than
10km/h, if you depress the accelerator
pedal for more than 5 seconds or if you
shift the shift lever from D (Drive) to
sports mode and shift it from sports
mode to D (Drive) again, the system
changes from manual mode to automatic
mode.

With the shift lever in the sports mode 

Pull the [+] or [-] paddle shifter once to
shift up or down one gear.

✽

✽

NOTICE

If you pull the [+] and [-] paddle shifters
at the same time, you cannot shift the
gear.

Shift lock system (if equipped)

For your safety, the automatic transaxle
has a shift lock system which prevents
shifting the transaxle from P (Park) or N
(Neutral) into R (Reverse) unless the
brake pedal is depressed.
To shift the transaxle from P (Park) or N
(Neutral) into R (Reverse):
1. Depress and hold the brake pedal.
2. Start the engine or turn the ignition

switch to the ON position.

3. Move the shift lever.
If the brake pedal is repeatedly
depressed and released with the shift
lever in the P (Park) position, a chattering
noise near the shift lever may be heard.
This is a normal condition.

Shift-lock override

If the shift lever cannot be moved from
the P (Park) or N (Neutral) position into R
(Reverse) position with the brake pedal
depressed, continue depressing the
brake, then do the following:
1. Press the shift-lock release button.
2. Move the shift lever.
3. Have your vehicle inspected by an

authorized HYUNDAI dealer immedi-
ately.

OVF051006

WARNING

Always fully depress the brake
pedal before and while shifting out
of the P (Park) position into anoth-
er position to avoid inadvertent
motion of the vehicle which could
injure persons in or around the
vehicle.

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands