manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 247

4 169

Features of your vehicle

7.

Button

• Press

button to move to

child folder of the current folder and
display the first song in the folder.
Press 

knob to move to the

folder displayed. It will play the first
song in the folder.

• Press

button to move to par-

ent folder display the first song in the
folder. Press knob to 

move 

to

the folder displayed.

8.

& Knob

• Turn this knob clockwise to browse

songs after current song, or counter
clockwise to browse songs before cur-
rent song. To play the displayed song,
press the knob.

• Pressing this knob without turning

enters to AUDIO CONTROL mode.

PTY

FOLDER

PTY

FOLDER

FOLDER

VF_EU_USB

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands