manualshive.com logo in svg

Hyundai i40 Saloon 2012, Owner'S Manual

Share
Download
Hyundai i40 Saloon 2012 Owner'S Manual Download Page 322

5 61

Driving your vehicle

• The shadow is on the lane marker by

a median strip.

• There is a mark similar to a lane

marker.

• There is a boundary structure.
• The distance from vehicle ahead is

very short or the vehicle ahead drives
hiding the lane marker.

• The vehicle shakes heavily.
• The lane number increases or decreas-

es or the lane marker are crossing
complicatedly.

• Placing something on the dashboard.
• Driving with the sun in front of you.
• Driving in areas under construction.
• The lane marker is more than two.
• The lane marker in a tunnel is hard to

distinguish due to dust or grease.

• The lane marker is hard to distinguish

after raining at night.

• The lane marker is hard to distinguish

due to dust.

LKAS malfunction

• If there is a problem with the system a

message will appear for 2 seconds
with an audible warning. If the problem
continues the LKAS fail indicator will
illuminate.

LKAS fail indicator

The LKAS fail indicator (yellow) will illu-
minate with an audible warning if the
LKAS is not working properly. Take your
vehicle to an authorized HYUNDAI deal-
er and have the system checked.

OVF051064

OVF051056

Summary of Contents for i40 Saloon 2012

















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands