![background image](http://html1.mh-extra.com/html/hyundai/f4ge9454j-j604/f4ge9454j-j604_technical-and-repair-manual_2196319043.webp)
The following information relate to the engine overhaul
operations only for what concerns the different components
customising the engine, according to its specific duties.
With regard to the engine disassembly operations,
please apply for information consulting the specific
manual. All operations of
engine disassembly
operations as well as overhaul operations must be
executed by qualified engineers provided with the
specific tooling and equipment required.
116386
Figure 2
In order to apply the brackets 99361037 to the engine block
to fix it on to the stand 99322205 for the overhaul, it is
necessary to perform the following operations:
On the right hand side:
-
disassemble pipes (1) from the union (2) fitting the
lubrication oil filter (assembled on the opposite side):
unlock the nuts fixing the pipes (1) and remove them from
the union (2); drain the oil eventually still inside the pipes
and plug them properly in order to avoid impurity inlet.
Within ”General overhaul” section, all the operations of
engine block overhaul have been contemplated. Therefore
the above mentioned section is to be considered as following
the part hereby described.
Engine setting operations for the assembly on
turning stand
For specific application exigencies, some units can
be assembled to the engine in different positions.
For some versions, the oil filter (3) is directly
assembled on to the heat exchanger:in such case
it shall be disassembled using tool 99360076.
Warning: the oil filter contains inside aprx. 1 kg. of
engine oil. Provide for oil recovery and disposal in
compliance with the law and regulations in force.
-
disassemble lubrication oil exhaust pipe from the
turbo-blower:
Underneath the turbo-blower loosen the two screws
(2), loosen the screw (3) fixing the pipe throughout the
stop collar (4) fixing the block; finally loosen and remove
the union (5) from the block; plug the pipe ends and the
exhaust of the turbo-blower.
Figure 3
75671
75672
-
Disassemble the starter;
Properly hold the starter (2) and loosen the fixing screws
(1);
assemble the supporting bracket (99361037) using the
threaded ports on the basement.
2
3
4
1
5
1
2
3
Figure 4
OVERHAUL OF THE ENGINE
Preface
Part of the operations illustrated within this section can be
partially executed while the engine is assembled on the
vehicle, depending on the room available for access to the
engine and on the equipment application as well.
NOTE
NOTE
NOTE
SECTION 3 - AGRICULTURAL APPLICATION
9
F4GE N SERIES
Print P2D32N010 E
Base - February 2009
Summary of Contents for F4GE9454J*J604
