![background image](http://html1.mh-extra.com/html/hyundai/f4ge9454j-j604/f4ge9454j-j604_technical-and-repair-manual_2196319116.webp)
This check is performed by setting a magnetic-base dial gauge
(2) on the output shaft (3) as shown in the figure, standard
value is 0.068 to 0.41.
If higher value is found, replace main thrust half bearings of
the second last rear support (1) and repeat the clearance
check between output shaft pins and main half bearings.
70188
70190
70191
Figure 30
Figure 31
Figure 32
-
3
rd
stage, with tool 99395216 (1) set as shown in the
figure, tighten the screws (2) with 90
° ±
5
°
angle.
CONNECTING ROD — PISTON ASSEMBLY
COMPONENTS
1. Stop rings - 2. Pin - 3. Piston - 4. Split rings - 5. Screws -
6. Half bearings - 7. Connecting rod - 8. Bush.
α
Checking output shaft shoulder clearance
The pistons are supplied spare with the following
sizes:
-
standard;
-
0.4 mm oversize.
CONNECTING ROD — PISTON ASSEMBLY
NOTE
Figure 33
70187
Tighten the pre-lubricated screws (1) in the following three
successive stages:
-
1
st
stage, with dynamometric wrench to 50
±
6 Nm.
-
2
nd
stage, with dynamometric wrench to 80
±
6 Nm.
20
SECTION 4 - OVERHAUL AND TECHNICAL SPECIFICATIONS
F4GE N SERIES
Base - February 2009
Print P2D32N010 E
Summary of Contents for F4GE9454J*J604
