Hyundai F4GE9454J*J604, Technical And Repair Manual

Page: 59 / 142

Figure 60
-
Assemble the following elements to the block: new
gasket (1), heat exchanger (2), new gasket (3), oil filter
bearing (4).
Tighten the screws (5) and lock them to the prescribed
couple.
Before assembly, always check that the threads of
the ports and of the screws have no evidence of
tear and wear nor dirt.
75697
-
Assemble the pulley (1) to the engine drive shaft , and
the distance ring (3).
-
Tighten the fixing screws (2) and lock them to the 110
±
5 Nm couple.
Figure 61
Set the gasket (1) on the oil sump (2).
The shape and the size of the sump vary according
to the usage of the engine.
-
Assemble oil pan (1), apply the plate over it (2). Tighten
the screws (2) and lock them to the prescribed couple.
132104
Before assembly, always check that the threads of
the ports and of the screws have no evidence of
tear and wear nor dirt.
Figure 62
Figure 63
1
2
3
NOTE
NOTE
NOTE
107275
119123
SECTION 3 - AGRICULTURAL APPLICATION
25
F4GE N SERIES
Print P2D32N010 E Base - February 2009