![background image](http://html1.mh-extra.com/html/hyundai/f4ge9454j-j604/f4ge9454j-j604_technical-and-repair-manual_2196319069.webp)
Figure 95
Rotary feed pump disassembly and assembly
procedure
This procedure prescribes that:
-
the fuel pipes (from the pumping elements to
the injectors, recovering blow-by from the
injectors to the pump and the supply from the
priming pump) have all been removed;
-
the
electrical
connections
have
been
disconnected.
-
Accelerator cable shall be disconnected.
Disassemble the starter from the flywheel box and use tool
99360330 to rotate the flywheel.
In case feed pump replacement is necessary, this shall be
supplied pre-set already as spare part.
On the other hand, in case the pump shall be disassembled
and reassembled later on without being repaired it will be
necessary to pr-set it while it is still assembled to the engine
and disassemble it only afterwards.
The following procedure analyses this second hypothesis
since it is the more complex.
88140
1
Figure 96
88141
Find the top dead centre with the tool (99395097) - False
injector
1
Remove the rocker covers of the 1
st
cylinder; remove the 1
st
injector and place the tool (1) to set the 1
st
cylinder top dead
centre position (end-of-compression phase). Pre-load the
gauge.
The searched condition is obtained by rotating the engine
shaft properly until you find the maximum value on the
comparator and then checking that the intake and exhaust
valves are both closed.
Figure 97
84071
Turn the flywheel until, when pushing the pin 99360616 (1),
it blocks the gear (2) obtaining the TDC of the 1
°
cylinder.
NOTE
SECTION 3 - AGRICULTURAL APPLICATION
35
F4GE N SERIES
Print P2D32N010 E
Base - February 2009
Summary of Contents for F4GE9454J*J604
