Hyundai F4GE9454J*J604, Technical And Repair Manual

Page: 54 / 142

70211
-
Use a felt pen to mark the driving gear (1) tooth fitted
on the output shaft (2) having the mark (
→
) for timing
on the side surface.
Screw up two pins to facilitate operation of engine
drive shaft rotation.
87653
-
Place the dial gauge (1) on the timing gear (2) and check
that the slack between the gears (2) and (3) is included
in the range between 0,076
÷
0,280 mm.
87654
-
Fit the screws (1) fastening the gears (2) to the camshaft
(3) and tighten them to the prescribed pair.
87655
-
Spline the gear (1) transferring motion to the ignition
pump.
Figure 40
Figure 41
Figure 42
Figure 43
Figure 44
NOTE
-
Turn the engine shaft (3) and the distribution shaft (4)
so that by mounting the bevel gear on the latter (1) the
stencilled mark on the gear (1) coincides with the groove
on the gear tooth (2).
116355
20
SECTION 3 - AGRICULTURAL APPLICATION F4GE N SERIES
Base - February 2009 Print P2D32N010 E