Hyundai F4GE9454J*J604, Technical And Repair Manual

Page: 79 / 142

Figure 111
Oil pressure sensor
Figure 112
Electromagnets assembled to feed pump
75724a
1 - Engine STOP solenoid;
2 - KSB Electro-magnet
75722
It is assembled to the block on the engine’s left hand side.
Specifications:
Working tensions: 12
÷
24 V
Contact closure
upon lower pressure:
0.6 bar
Contact opening
upon higher pressure:
0.9 bar
2
1
Alternator
It is place front view on the right hand side of the engine, and
is driven by tooth belt.
Specifications:
Working tension: 12 V
Current delivered: 90A (at 6000 rpm)
Absorption in stand-by:
≤
1mA
Sense of rotation: clockwices
75725
Figure 113
Pre-post heating resistor
It is a resistor assembled to the suction collector and is utilised
to heat the air during pre-post heating operations.
It is fed by a tele-switch usually placed very close to the engine.
Specifications:
Working tension: 12 V
Maximum possible
air flow:
2 cc / min
(pressure 138 kPa)
Figure 114
75723
SECTION 3 - AGRICULTURAL APPLICATION
45
F4GE N SERIES
Print P2D32N010 E Base - February 2009