![background image](http://html1.mh-extra.com/html/hyundai/f4ge9454j-j604/f4ge9454j-j604_technical-and-repair-manual_2196319115.webp)
70184
70185
Figure 26
Figure 27
Figure 28
Figure 29
Refit the output shaft (2).
Check the backlash between output shaft main journals and
the relevant bearings as follows:
Refit the main bearings that have not been
replaced, in the same position found at removal.
Fitting main bearings
Do not try to adapt the bearings.
Main bearings (1) are supplied spare with 0.250 — 0.500 mm
undersize on the internal diameter.
Clean accurately the main half bearings (1) having the
lubricating hole and fit them into their housings.
The second last main half bearing (1) is fitted with shoulder
half rings.
Check that gear toothing (1) is not damaged or worn,
otherwise remove it using the proper puller (3).
When fitting the new gear, heat it to 180
°
C for 10 minutes
in an oven and then key it to the output shaft.
Finding journal clearance
-
clean accurately the parts and remove any trace of oil;
-
fit caps (1), including the half bearings (2) on the relevant
supports.
128169
70161
Replacing oil pump control gear
NOTE
NOTE
75703
D1
D2
NOTE
Before using the fixing screws again, measure them
twice as indicated in the picture, checking D1 and
D2 diameters:
if D1 - D2 < 0,1 mm the screw can be utilised again;
if D1 - D2 > 0,1 mm the screw must be replaced.
SECTION 4 - OVERHAUL AND TECHNICAL SPECIFICATIONS
19
F4GE N SERIES
Print P2D32N010 E
Base - February 2009
Summary of Contents for F4GE9454J*J604
