Hyundai F4GE9454J*J604, Technical And Repair Manual

Page: 66 / 142

-
Assemble the pipes (1) and (2) providing fuel feed and
recovery between pump and injectors;
Screw up the locking nuts and tighten the screws fixing
the fuel recovery manifold; fix the pipes to the injectors
throughout the brackets previously assembled.
Figure 86
Figure 87
75679
75677
-
Fix the LDA pipeline (1) to the engine head and to the
feed pump.
1
1
2
1
Figure 88
70126
Figure 89
-
Assemble the fuel filter bearing (4) to the bracket fixed
to the engine head.
-
Connect the fuel pipelines (2 and 3) respectively from
priming pump to filter bearing and from this last one to
feed pump.
-
Using 99360076 equipment assemble fuel filter (1).
To connect fuel pipelines (3 and 4, Figure 89) in
low pressure from the relating connection unions
it is necessary to press the locking fastener (1) as
shown in picture B.
After having connected the pipeline, reset the
fastener (1) into block position as shown in
pictur A.
The filter shall be priory filled with fuel to facilitate
feed system bleed operations. NOTE
123024
NOTE
32
SECTION 3 - AGRICULTURAL APPLICATION F4GE N SERIES
Base - February 2009 Print P2D32N010 E