Hyundai F4GE9454J*J604, Technical And Repair Manual

Page: 51 / 142

Figure 31
75690
-
Screw up two medium length screws in the ports (4) to
sling the flywheel with a hoist.
Throughout two guide pins (2) previously screwed up
into the engine drive shaft ports (3) control the engine
flywheel withdrawal by means of a hoist.
00903t
-
Remove the flywheel cover box fixing ring using the
tool 99340056 (3) to operate on the back tang (5) of
the engine drive shaft. Throughout the tool guide ports,
drill the internal holding ring using Ø 3,5 mm drill for
a 5mm depth.
- Fix the tool 99340056 (3) to the ring (1) tightening the
6 screws specially provided (4).
-
Proceed with drawing the ring (1) tightening the screw
(2).
-
Using the specially provided tie rod (3) for the tool
99363204 and the lever (4), withdraw the external
holding ring of the flywheel cover box.
Figure 32
84077
- Loosen the screws (2) and remove the flywheel cover
box (1).
Take note of the screw (1) assembly position, since
the screws have different length.
Figure 33
-
Turn the engine upside-down.
-
Loosen the screws (2), disassemble the plate (3) and
remove the oil pan (1).
132104
The shape and the size of the sump vary according
to the usage of the engine.
1
2
3
4
Figure 34
NOTE
NOTE
(Demonstrative)
SECTION 3 - AGRICULTURAL APPLICATION
17
F4GE N SERIES
Print P2D32N010 E Base - February 2009