Hyundai F4GE9454J*J604, Technical And Repair Manual

Page: 35 / 142

SECTION 3 - AGRICULTURAL APPLICATION
1
F4GE N SERIES
Print P2D32N010 E Base - February 2009
SECTION 3
Agricultural application
Page
GENERAL INFORMATION 3 . . . . . . . . . . . . . . . . . .
CLEARANCE DATA 4 . . . . . . . . . . . . . . . . . . . . . . .
PART ONE -
MECHANICAL COMPONENTS 7 . . . . . . . . . . .
OVERHAUL OF THE ENGINE 9 . . . . . . . . . . . . . . .
-
Preface 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-
Engine setting operations for the assembly on
turning stand
9 . . . . . . . . . . . . . . . . . . . . . . . . . .
-
Disassembly of application components 11 . . . . .
-
Installation of rear components 19 . . . . . . . . . . . .
- Flywheel installation 22 . . . . . . . . . . . . . . . . . . . . .
-
Installation of front components 23 . . . . . . . . . . .
-
Completion of engine 33 . . . . . . . . . . . . . . . . . . .
-
Rotary feed pump disassembly and assembly pro-
cedure
35 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-
Power take-off disassembly and assembly
procedure
38 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Feed system bleed procedure 38 . . . . . . . . . . . . .
-
Checks and inspections 39 . . . . . . . . . . . . . . . . . .
PART TWO -
ELECTRICAL EQUIPMENT 41 . . . . . . . . . . . . . . .
ELECTRICAL COMPONENT LAYOUT 43 . . . . . . . .
-
Cooling liquid temperature sensor 44 . . . . . . . . .
- Starter 44 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-
KSB Water temperature sensor 44 . . . . . . . . . . .
-
Electromagnets assembled to feed pump 45 . . . .
-
Oil pressure sensor 45 . . . . . . . . . . . . . . . . . . . . .
-
Alternator 45 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Pre-post heating resistor 45 . . . . . . . . . . . . . . . . .