![background image](http://html1.mh-extra.com/html/hyundai/f4ge9454j-j604/f4ge9454j-j604_technical-and-repair-manual_2196319095.webp)
Whereas you replace the lubrication oil, it is necessary to re-
place the filter.
According to the application the filter can be located in differ-
ent positions: the following procedure is a valid guide for all
applications.
-
The filter is composed by a support and a filtering car-
tridge.
For
the
cartridge
replacement
use
the
9936076-tool.
Warning: the oil filter contains inside a quantity of oil
of about 1 kg.
Place properly a container for the liquid.
Warning: avoid the contact of skin with the motor oil:
in case of contact wash the skin with running water.
The motor oil is very pollutant: it must be disposed
of according to the rules.
-
Replace the filtering cartidge with a new one and screw
manually until when the gasket is in contact with the sup-
port.
-
Tigthen by means of the 99360076-tool of three fourth
turn.
-
Operate the motor for some minutes and check the level
through the dipsick again. If it is necessary, carry out a top-
ping up to compensate the quantity of oil used for the fill-
ing of the filtering cartridge.
Fuel filter replacement
According to the applications the filters position and the quan-
tity can change.
However the following operations are valid for all applications.
-
Drain the fuel inside the filter by operating the water re-
lease screw. Collect the fuel in a container without impu-
rities.
-
Unscrew the cartridge by using the 99360076-tool.
-
Collect the eventual fuel inside the filtering cartridge.
-
Clean the gasket seat on the support and oil slightly the
gasket on the new filtering cartridge.
-
Screw manually the new filtering cartdrige until when the
gasket is completely on its seat.
-
Tigthen through the 99360076-tool at 10-5 Nm torque.
During this operation don’t smoke and don’t use free
flames.
Avoid to breathe the vapors coming from filter.
!
After filters replacement the supply equipment
deaeration must be carried out.
-
After the complete drainage, screw the plug and carry out
the clean oil filling.
!
Use only the recommended oil or oil having the re-
quested features for the corrrect motor functioning.
In case of topping up, don’t mix oils having different
features.
If you don’t comply with theses rules, the service war-
ranty is no more valid.
-
Check the level through the dipsick until when the filling
is next to the maximum level notch indicated on the dip-
sick.
SECTION 3 - AGRICULTURAL APPLICATION
61
F4GE N SERIES
Print P2D32N010 E
Base - February 2009
Summary of Contents for F4GE9454J*J604
