Husqvarna TC 50 2023 Owner'S Manual Download

Page: 96 / 196

13 WHEELS, TIRES

H01198-10

–

Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:

–

Change front wheel bearing.

–

Clean and grease the contact surfaces

of the spacers.

Long-life grease (

p. 139)

–

Insert the spacers.

A00087-11

–

Clean and grease the wheel spindle.

Long-life grease (

p. 139)

–

Position the front wheel.

The brake linings are correctly positioned.

–

Insert the wheel spindle.

V00545-10

–

Mount and tighten screw

Guideline

Screw, front

wheel spindle

M10

40 Nm (29.5 lbf ft)

Loctite

243™

–

Operate the hand brake lever several times until the brake

linings are seated correctly against the brake disc.

–

Remove the motorcycle from the lift stand. (

p. 42)

–

Operate the front brake and compress the fork a few times

firmly.

The fork legs straighten.

–

Tighten screws

Guideline

Screw, fork stub

10 Nm (7.4 lbf ft)

13.3

Removing the rear wheel

Preparatory work

–

Raise the motorcycle with a lift stand. (

p. 42)

F02209-10

Main work
(TC 50)

–

Remove nut

–

Take off chain adjuster

Summary of Contents for TC 50 2023





































































































































































































Search results

Summary of Contents for TC 50 2023

Reviews:

Related manuals for TC 50 2023

Brands by name

Popular brands

Husqvarna TC 50 2023, Owner'S Manual

Search results

Summary of Contents for TC 50 2023

Reviews:

Related manuals for TC 50 2023

Brands by name

Popular brands