Husqvarna TC 50 2023 Owner'S Manual Download

Page: 80 / 196

12 BRAKE SYSTEM

Info

Turn the adjusting screw clockwise to increase the

distance between the hand brake lever and the han-

dlebar.
Turn the adjusting screw counterclockwise to

decrease the distance between the hand brake lever

and the handlebar.
The range of adjustment is limited.

V02099-10

–

Position cover

. Mount and tighten screw

12.4

Checking the brake discs

Warning

Danger of accidents

Worn-out brake discs reduce the braking effect.

–

Make sure that worn-out brake discs are replaced immediately. (Your authorized Husqvarna Motor-

cycles workshop will be glad to help.)

400257-10

–

Check the front and rear brake disc thickness at multiple
points for the dimension

Info

Wear reduces the thickness of the brake disc around

the contact surface of the brake linings.

Brake discs - wear limits

front

2.2 mm (0.087 in)

rear

2.2 mm (0.087 in)

» If the brake disc thickness is less than the specified value:

–

Change the front brake disc.

–

Change the rear brake disc.

–

Check the front and rear brake discs for damage, cracking,

and deformation.
» If the brake disc exhibits damage, cracking, or deforma-

tion:

–

Change the front brake disc.

–

Change the rear brake disc.

Summary of Contents for TC 50 2023





































































































































































































Search results

Summary of Contents for TC 50 2023

Reviews:

Related manuals for TC 50 2023

Brands by name

Popular brands

Husqvarna TC 50 2023, Owner'S Manual

Search results

Summary of Contents for TC 50 2023

Reviews:

Related manuals for TC 50 2023

Brands by name

Popular brands